|
|
|
|
|
|
|
|
|
|
|
|
| |
- Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range
- Designed for hydraulics, but could be run with solids
- Grind #1 is the low-compression version of an “A” grind cam for 74” and 80” models
- Grind #2 offers more power through the rpm range for engines with low-compression pistons; the low-compression sister to a “B” grind cam
- Will not fit Evolution models
NOTE: On late 77 and later engines, the pitch diameter on the camshaft, pinion gear and breather valve gear was changed. These components are not interchangeable with earlier style components unless replaced in sets only. Late 77 and later gear sets are identified by a circular groove machined in the outer face of the cam gear.
|
|
|
|
|
|
|
|
|  
CLOSEOUT
In Store Special
30% OFF RETAIL
SCHUBRETH HELMETS
WHILE SUPPLIES LAST
We also
carry these
fine products
Nolan
Shoei
Scorpion
HJC
Olympia
Gerbings
Shift
FMC Leathers
TCX Boots
Nolan Bluetooth
Autocom
Scala Rider
Powerlet
Tom Tom Rider
Garmin Zumo550
| |
|
|
|
